The Mark605 is a low cost, high speed, high resolution embeddable inkjet print controller featuring the clean, low maintenance convenience and dependability of Hewlett-Packard disposable print cartridges.
Designed for seamless integration into custom applications, multiple Mark605 controllers may be stacked together to create user definable print heights. Preconfigured Outboard Modules (cartridge holders) add to ease of installation in industrial environments
The Mark605 is available in 2 versions:
– Mark605F with flex connectors.
– Mark605D with D-Sub connectors for high vibration environments. Available with horizontal or vertical connector configurations. Fits in standard DIN Rail.
For the most demanding graphic applications, the Mark605 can deliver up to 600 x 600 dpi and each Mark605 controller supports 2 printheads.
The simple control protocol provides access to macros for serialization, counting, date calculations, time offsets and timestamps etc.
The Mark605 is equipped with user definable input/output lines allowing control from upstream PLCs, and signaling to external peripherals, minimizing the total installation footprint.
For many applications, a PC is not required after configuration. Connect, configure, unplug the PC and use in standalone operation. Onboard memory supports the print configuration.
User defined cartridge settings allow the Mark605 to be compatible with all standard branded HP and specialized solvent inks.
Simplified Protocol enabling full application integration
RS-232, High-speed USB
Internal clock/No encoder (0 – 15 kHz)
Rising or falling edge triggered
Programmable delay from trigger
User defined I/O
Ability to optimize voltage, firing frequency, pulse width and thermal controls
Drop counter for ink usage
Ink level signaling
Printhead maintenance modes
28V max 3A
3.3V max 300 mA
10-40°C at 10-50%RH
and 10-23°C at 10-90%RH
-30 to 60°C for 48 hours
Print Resolutions and Speeds
600h x 600v dpi at 25 ips, 125 fpm, 0.63 m/sec
300h x 600v dpi at 50 ips, 250 fpm, 1.26 m/sec
150h x 600v dpi at 100 ips, 500 fpm, 2.52 m/sec
100h x 600v dpi at 150 ips, 750 fpm, 3.81 m/sec
Other resolutions and speeds possible
Height: 0.5” (12.7mm) per printhead, stackable
Direction: forward and reverse
Bi-directional (mirror on X) per printhead
Upside-down (mirror on Y) per printhead
Fixed and variable ASCII text
User designed fonts or images
Time/Date stamp: fixed, real-time or postdated
Programmable Sequence Counters (4) per printhead